Home › Blog › Metal Roofing Price

Metal Roofing Price Guide for Memphis Homes (2026)

What a metal roof costs by size and system, how it compares with shingle over the life of a house, and what an estimate from us includes.

Metal, average
About $19.30 / sq ft
installed, national
Standing seam
$8–$39 / sq ft
full published range
2,000 sq ft roof
About $38,600
metal, vs about $10,320 asphalt

Sources: This Old House new roof cost guide (updated October 7, 2026) and standing seam cost guide (updated March 31, 2026). National figures, not a quote.

The national average price of metal roofing is about $19.30 per square foot installed, according to This Old House’s October 2026 cost guide, which comes to about $38,600 for a 2,000 square foot roof. Standing seam, the premium residential system, has a much wider published range of about $8 to $39 per square foot, because the metal, the panel and the shape of the roof all move the price.

This guide breaks down what a metal roof costs by roof size and by system, how it compares with shingle over the life of a house, the real drawbacks, and what goes into a written estimate from LASIM Contractors. Our metal roofing page covers the systems we install and how we install them.

What’s in this guide

How Much Does a Metal Roof Cost by Roof Size?

Start with the area of the roof itself, which is larger than the floor area of the house once overhangs and slope are counted. Here is what the two This Old House guides give at common sizes. The middle column uses the average metal rate; the right column is the full low-to-high range for standing seam.

Roof areaMetal, at the average rateStanding seam, published range
1,000 sq ft$19,300$7,540–$39,430
1,500 sq ft$28,950$11,310–$59,145
2,000 sq ft$38,600$15,080–$78,860
2,500 sq ft$48,250$18,850–$98,575

Sources: This Old House, “How Much Does a New Roof Cost?” (updated October 7, 2026) and “How Much Does a Standing Seam Metal Roof Cost?” (updated March 31, 2026).

So a metal roof on a house with about 1,500 square feet of roof lands near $29,000 at the national average, and the average cost of a 2,000 square foot metal roof is close to $38,600. The low end of the standing seam range is a simple roof in steel; the high end is premium metals, narrow panels and complicated roofs.

Why Metal Roofing Prices Vary So Much

Four things account for most of the spread:

  • The metal. This Old House prices steel standing seam at $4.59 to $8.55 per square foot, aluminum and zinc at $6.12 to $28.50, and copper at $12.24 to $26.60.
  • Panel width and gauge. Wider panels are generally cheaper per foot, and nearly all residential standing seam is 24 gauge. Heavier gauges cost more.
  • Labor. This Old House, citing RSMeans data, puts metal roof labor at $2.95 to $10.93 per square foot. This Old House also notes that standing seam is more dangerous to install than most roof types.
  • The shape of your roof. Simple gable and hip roofs suit metal best. Many valleys, dormers and penetrations mean more cutting, more flashing and more cost. If your roof is too cut-up for metal to make economic sense, we will say so.

Tear-off adds to it too. Bob Vila’s metal roof guide (updated July 2022) puts removing an existing roof at $1,000 to $1,500.

Standing Seam vs Exposed Fastener vs Metal Shingle

The system you choose matters as much as the metal. We install two families of metal roofing, and they price very differently.

Standing seam

Long vertical panels lock together at raised seams and are held down with concealed clips, so no screw goes through the panel surface. It is the premium option and our default recommendation for a home, because exposed screws are the most common metal-roof leak. Bob Vila lists standing seam materials at $200 to $1,000 per square (100 square feet).

Exposed-fastener panels

Corrugated and ribbed panels are screwed straight through the metal with gasketed screws. They cost less and are fine on the right building. Over time the gaskets age and the screws can back out, which is where these roofs leak. Bob Vila puts basic sheet metal at $75 to $600 per square for materials.

Metal shingles

Metal shaped to look like shingles or shakes, which suits some architecture better than long panels. Bob Vila gives $200 to $600 per square for materials.

Those per-square figures are materials only and date from 2022, so treat them as a way to compare systems rather than a current installed price.

What Roofing Metal Costs on Its Own

If you are pricing panels for a shed or a barn, the material is a small part of a finished home roof. This Old House quotes 24-gauge galvanized steel at $2.20 to $8.25 per square foot, citing a metal roofing supplier. On a house, the rest of the price is tear-off, deck repairs, a high-temperature underlayment, trim and flashing fabricated to fit, and the labor to set panels so they can expand and contract through a Memphis summer and winter.

Two crew members inspecting a commercial flat roof beside rooftop HVAC units
Two crew members inspecting a flat roof beside rooftop HVAC units. Every roof gets looked at before it gets priced.

Is Metal More Expensive Than Shingles Over Time?

On the day it goes on, yes, by a wide margin. At This Old House’s rates, a 2,000 square foot roof is about $10,320 in asphalt shingles and about $38,600 in metal. The same guide gives asphalt a lifespan of 30 to 35 years and metal 40 to 70.

In the Mid-South the shingle side of that comparison is often shorter. Hail, wind, summer heat and winter ice can wear a “thirty-year” architectural shingle out at eighteen or twenty. A properly installed standing seam roof will outlast two, sometimes three asphalt roofs, which is why the higher up-front price can work out cheaper over the time you own the house. Most metal systems also carry a Class 4 impact rating, and some insurers offer a discount for it.

Homeowners who go metal usually plan to stay in the house a long time, or are tired of hail claims. If you are not planning to stay long, impact-rated architectural shingle is the other answer to Mid-South hail, and our shingle and tile roofing page covers that option.

Close view of a new dark shingle roof and gable on a home
A new dark architectural shingle roof, the usual alternative to metal on a Mid-South home.

What Is the Biggest Problem With Metal Roofs?

The price. Beyond that, most metal roof problems come from how it was installed, not from the metal:

  • Exposed screws backing out. The most common metal-roof leak, and the reason we recommend concealed-fastener standing seam on homes.
  • Movement. Panels expand and contract with temperature. Clip systems that let them move keep the panels from fatiguing.
  • Cosmetic hail dents. Very large hail can dent some panels, though it almost never causes a leak. Heavier gauge and textured finishes hide dents better.
  • Surprise costs. This Old House found about 17% of homeowners who installed a metal roof said the final price was higher than expected. A written scope that names the deck, underlayment and flashing work is the best protection.

Noise is a common worry, and it does not hold up on a house. On a house, metal goes over solid decking, underlayment and an insulated attic, and from inside it sounds like any other roof.

What Goes Into a Metal Roof Estimate From Us

We price metal honestly against a premium shingle so you can compare the two side by side. A metal roof estimate from LASIM Contractors is built from:

  • An assessment of your roof. We measure, look at the structure and the ventilation, and tell you whether metal suits your roof’s geometry.
  • System and finish choices. Standing seam or metal shingle, panel profile, gauge and color, with samples on site.
  • Tear-off and deck inspection where there is an existing roof. We recommend a tear-off rather than going over old shingles.
  • High-temperature underlayment made for the heat a metal roof reaches, not standard felt.
  • Panels set to the manufacturer’s clip and fastening pattern, with flashing at every penetration fabricated to fit.
  • Warranty registration and a walkthrough of the finished roof.

When to Call in Memphis and the Tri-State

If you are replacing a roof anyway, or you are on your second hail claim in a few years, it is worth pricing metal next to shingle before you decide. We install metal roofs across Memphis, Bartlett, Collierville, Germantown and Cordova, Southaven, Olive Branch and Horn Lake, and West Memphis and Marion. See our metal roofing page, or use the form on this page to request a free estimate.

Metal Roofing Price Questions

How much does a metal roof cost on a 1,500 square foot house?

At This Old House's average metal rate of $19.30 per square foot, 1,500 square feet of roof comes to about $28,950. Standing seam on the same roof has a published range of about $11,310 to $59,145, depending on the metal, the panels and how complex the roof is. Measure the roof area, not the floor area, since the roof is usually larger.

Is it cheaper to do a metal or shingle roof?

Shingle is much cheaper up front: about $10,320 for a 2,000 square foot asphalt roof against about $38,600 for metal at This Old House's national rates. Metal lasts longer, and in the Mid-South a standing seam roof can outlast two or three shingle roofs, so the cost over the time you own the house can come out closer.

Is metal roofing a good investment?

It usually is if you plan to stay in the house for many years or keep filing hail claims. Standing seam realistically lasts forty to sixty years when installed properly, most metal systems carry a Class 4 impact rating, and some insurers discount for it. For a shorter stay, an impact-rated shingle is the other option to price.

What is the best thing to put under a metal roof?

A solid, inspected deck and a high-temperature underlayment made for the heat a metal roof reaches, rather than standard felt. Starting from a clean deck after a tear-off is what lets the roof reach its full life.

Will hail dent a metal roof?

Very large hail can leave cosmetic dents in some panels, but it almost never causes a leak or a functional failure. Heavier gauge panels and textured finishes hide dents better, and most metal systems carry a Class 4 impact rating.

Can a metal roof go over existing shingles?

Some codes allow it, but we recommend a tear-off first. Going over the old roof hides the decking so rot cannot be found, traps moisture between the layers, and can show the old shingle texture through the panels.