Home › Blog › Gutter Installation Cost

Gutter Installation Cost for Memphis Homes (2026)

What new gutters cost per foot and for a whole house, what moves the price, and what goes into a written gutter estimate from us.

Typical home
About $3,200
200 ft of gutter, national average
Per linear foot
$3–$29
about $16 on average
Gutter guards
$7–$12 / ft
installed, on top of the gutters

Sources: This Old House gutter installation cost guide (updated October 9, 2026) and Bob Vila’s gutter installation cost guide (updated June 9, 2023). National figures, not a quote.

The average gutter installation cost for a typical 2,000 square foot home is about $3,200, according to This Old House’s October 2026 cost guide. That home needs roughly 200 linear feet of gutter, and the same guide puts the national range at $600 to $5,800, or $3 to $29 per linear foot. The material, the height of the house, the downspouts and any guards decide where in that range your house lands.

This guide breaks down gutter prices by home size and by material, seamless against sectional, the extras that add up, and what goes into a written gutter estimate from LASIM Contractors. Our gutter installation and repair page covers how we size and hang gutters.

What’s in this guide

How Much Does Gutter Installation Cost by Home Size?

Gutters are priced by the linear foot, so the length of your eaves is what counts. This Old House ties gutter length to the floor area of the house; Bob Vila gives a low-to-high range for the same lengths.

Home sizeGutter lengthAverage installed (This Old House)Range for that length (Bob Vila)
1,000 sq ft100 ft$1,600$500–$1,500
1,500 sq ft150 ft$2,400$750–$2,300
2,000 sq ft200 ft$3,200$1,000–$3,000
2,500 sq ft250 ft$4,000$1,250–$3,800

Sources: This Old House, “How Much Does Gutter Installation Cost?” (updated October 9, 2026); Bob Vila, “How Much Does Gutter Installation Cost?” (updated June 9, 2023).

The two sources disagree because they measure different years and different jobs. Bob Vila’s figures are from 2023 and lean on vinyl and basic aluminum, while This Old House’s 2026 average includes pricier metals. For seamless aluminum on a Mid-South home, the This Old House column is the more realistic starting point.

Upper eaves and white trim of a two-story brick home against a blue sky
The upper eaves of a two-story brick home. Gutters this high take more ladder work and longer downspouts, which shows up in the price.

Gutter Cost per Linear Foot by Material

Material is the biggest single choice after length. Here is what each costs installed, per foot, and what This Old House gives for the materials alone on a 200-foot system.

MaterialInstalled, per linear footMaterials for 200 ft
Vinyl$3–$6$571
Aluminum$4–$14$1,535
Galvanized steel$6–$14$1,604
Stainless steel$9–$20Not listed
Zinc$10–$29Not listed
Copper$25–$40 or more$5,749

Installed prices: Bob Vila (2023, citing HomeAdvisor). Materials for 200 feet: This Old House (2026).

Vinyl is the cheapest and the easiest to hang yourself, and it comes only in sections. Aluminum is what we install: it does not rust, it comes in colors to match the trim, and it can be formed seamless on site from a coil. Steel and copper cost more and suit specific houses, usually older or high-end homes.

Seamless vs Sectional Gutters

Sectional gutters come in ten-foot lengths that are joined on the house. Seamless gutters are formed from a coil of aluminum on site, cut to the exact length of each run. Bob Vila puts labor at $2 to $6 per foot for sectional and $3 to $10 per foot for seamless, and a seamless system at $800 to $5,000 installed depending on material and length.

The difference is the joints. Every joint in a sectional run is a seam held by sealant, and sealant ages. On a seamless run the only joints are at the corners and the downspout outlets. That is why we install seamless aluminum gutters, in 5-inch and 6-inch profiles, and why seamless is worth the small extra cost on a house you plan to keep.

The Extras That Add to a Gutter Price

The per-foot price is the gutter itself. These are the line items that usually sit next to it on an estimate. Figures are national, from Bob Vila’s guide unless noted.

  • Downspouts. $9 to $12 per foot in aluminum, $5 to $8 in vinyl. A two-story house needs longer ones, and a long run needs more than one.
  • A second story. $1 to $3 more per linear foot for each additional story, for the ladder and staging time.
  • Removing the old gutters. $0.65 to $0.85 per linear foot to take down and haul away.
  • Gutter guards. $7 to $12 per linear foot installed.
  • Downspout extensions. $10 to $50 each, plus $30 to $100 to install, to carry water away from the foundation.
  • Small parts. This Old House lists hangers and brackets at $2 to $17 each, elbows at $4 to $8, and splash blocks at $6 to $66.
  • Fascia repair. Neither guide prices it, because it depends on how much wood is rotten. A new gutter hung on soft fascia pulls loose, so the wood gets fixed first.
Shingle roof edge with the fascia board and trim running above a brick wall
The fascia board along a roof edge, above brick. This is the board a gutter hangs on, so it is checked before any gutter goes up.

Why Memphis Gutters Work Harder

Memphis gets more than fifty inches of rain a year, and a good share of it arrives in storms that drop two inches in an hour. On a typical roof that is thousands of gallons coming off the eaves in one afternoon. Undersized gutters overflow, and the water goes down the siding, behind the fascia and against the foundation. That is why we size gutters for the roof area and pitch rather than using one size for every house, and why large or steep roofs get 6-inch gutters and oversized downspouts.

Two other local factors show up on gutter estimates here:

  • Trees. Homes under mature oaks, pecans and pines fill a gutter every fall. On those houses, guards are often worth their cost. On a house with no overhanging trees they often are not.
  • Hail. Hail that damages shingles dents aluminum gutters and downspouts too. Damaged gutters are usually a normal line item on a roof claim, so if you have had a storm, have them looked at with the roof before you pay for new ones yourself. Our insurance claim assistance page explains how that works.
Two-story brick and stone home with a newly installed shingle roof and a large shade tree beside the entrance
A brick and stone home after a new shingle roof, with a large tree right beside it. Trees this close to the eaves are the usual case for gutter guards.

What Goes Into a Gutter Estimate From Us

Gutter installation is priced by the job, not by a number on a website, because the same four things move it every time: the total length and height of the runs, the gutter profile, the condition of the fascia, and guards. A gutter estimate from LASIM Contractors is built from:

  • A measured layout. Every run measured, with the roof area and pitch that feeds it.
  • Sizing. 5-inch or 6-inch per run, and the number and size of downspouts, worked out for the actual roof. A run that is too long for one downspout gets two.
  • Fascia condition. Rotted fascia is repaired before a new gutter is hung on it.
  • Hidden hangers screwed into the rafter tails, not spikes through the fascia that work loose.
  • Downspout placement where the water should go, with extensions or drains to carry it clear of the foundation.
  • Guards, priced as an option where trees make them worth it.

Each choice is priced on the written estimate, so you can see what changes the number. If the roof is being replaced too, the gutters go on the same estimate, and the drip edge, fascia and gutter are designed to work together. Our roof replacement cost guide covers that side.

When to Call in Memphis and the Tri-State

Call when gutters overflow in a normal storm, pull away from the house, leak at the joints, or have been dented by hail, or when you are replacing the roof anyway. We install seamless gutters across Memphis, Bartlett, Collierville, Germantown and Cordova, Southaven, Olive Branch and Horn Lake, and West Memphis and Marion. See our gutter installation page, or use the form on this page to request a free estimate.

Gutter Installation Cost Questions

How much is 200 linear feet of gutters?

About $3,200 installed at This Old House's national average, which is the length a typical 2,000 square foot home needs. Bob Vila's guide gives a range of $1,000 to $3,000 for 200 feet. Material, height, downspouts and guards move it from there.

How much should I pay to have my gutters cleaned?

Bob Vila's guide puts a professional gutter cleaning at $125 to $225. Homes under big oaks, pecans or pines need it more often, which is where gutter guards start to pay for themselves.

How long does gutter installation take?

Most homes are done in a day. Bob Vila's guide puts a professional install at 7 to 10 hours. Rotted fascia that has to be replaced first, a second story or a lot of downspouts add time.

Are seamless gutters worth the extra cost?

Usually, yes. Sectional gutters are joined about every ten feet, and every joint is a place that can leak. Seamless gutters are formed on site to the length of each run, so the only joints are at the corners and outlets. They cost a little more up front and last much longer.

Do I need 5-inch or 6-inch gutters?

It depends on the roof area draining into each run and the pitch. Most modest homes are fine with 5-inch. Larger roofs, steep pitches and long runs need 6-inch gutters and oversized downspouts, or they overflow in the heavy storms Memphis gets several times a year.

Will insurance pay for hail-damaged gutters?

Usually, as part of a storm claim on the roof. Hail that damages shingles dents aluminum gutters and downspouts too, and they are a normal line item on a claim. We document them alongside the roof damage so they are in the scope from the start.